PIC16F15255 Product Overview

PIC16F15255 is a 28-pin / 26-i/o class member of the PIC16F152 8-bit microcontroller family. It combines 14 KB of program Flash, 1,024 bytes of SRAM and 26 I/O resources with 10-bit adc, 17 external channels plus internal sources. 28-pin general-purpose controller for higher-I/O applications. The PIC16F152 family targets cost-sensitive embedded control with a compact enhanced mid-range core, Peripheral Pin Select, a 10-bit ADC, PWM/CCP resources and standard serial communication. The family is useful when the design needs predictable control and flexible pin routing without the cost or software overhead of a larger MCU.

For independent-distribution and sourcing content, the most credible positioning is not to describe PIC16F15255 as universally “best” or “hot.” Instead, the landing page should connect its memory, pin count and peripherals to a defined design problem, while clearly separating technical suitability from live inventory and pricing.

Key Technical Specifications

Why This Device Is Worth Promoting

Best suited to broad long-tail SEO: appliance control, sensor nodes, simple industrial I/O, lighting, user interfaces and replacement-oriented searches. Higher-memory versions and package-size steps generally create stronger buyer intent than the smallest variants.

· Model-specific search intent: buyers often search “PIC16F15255 datasheet,” “PIC16F15255 supplier,” “PIC16F15255 price” or an exact ordering code.

· Clear application angle: 28-pin general-purpose controller for higher-I/O applications.

· Scalable family story: adjacent PIC16F152 devices can be linked for memory, package and I/O migration.

· Commercial conversion opportunity: the page can capture both engineering qualification and purchasing/RFQ traffic without publishing unverified stock claims.

Typical Applications

· multi-I/O control boards

· appliance main controllers

· industrial sensor aggregation

· small machine interfaces

PIC16F15255 should be presented as a candidate for these applications, not as an automatic drop-in solution. Final suitability depends on firmware size, timing, analog accuracy, package, temperature range, qualification requirements and the complete system architecture.

Selection and Design Considerations

Use the memory and I/O ladder to match the firmware and board footprint. The family keeps a consistent control-oriented peripheral set, making adjacent devices useful for capacity or pin-count migration.

1. Confirm that the Flash and SRAM margin covers production firmware, bootloader, communication stacks and future updates.

2. Check the exact peripheral instances, PPS mapping, ADC channels, timers and communication requirements against the current datasheet.

3. Select the complete orderable part number, including package, temperature grade and packing format; the base model alone is not sufficient for a purchase order.

4. Review the latest silicon errata, PCNs and lifecycle information before design release or approving an alternative.

5. Do not describe a related part as pin-compatible or firmware-compatible unless the pinout, electrical limits and software migration have been verified.

Adjacent Devices and Migration Direction

· Lower-memory/cost direction: PIC16F15224

· Higher-memory direction: PIC16F15256

· Alternative I/O or package direction: PIC16F15245

PIC16F152 devices are not interchangeable solely by family name. Confirm pinout, package, program memory, SRAM, ADC channels, PPS mapping and the complete ordering suffix before recommending a substitute.

Procurement and Quality Checklist

· Request the full manufacturer part number and target quantity, not only the base device name.

· Confirm package, lead count, temperature grade, RoHS/REACH requirements and tray/tube/tape packaging.

· Verify date code expectations, traceability documents, moisture sensitivity level and storage condition when required.

· For legacy maintenance, confirm firmware and board revision before proposing an alternative.

· For new designs, compare current family members and current Microchip recommendations rather than choosing only by spot price.

Frequently Asked Questions

What is PIC16F15255 mainly used for?

It is best positioned for multi-i/o control boards, appliance main controllers, industrial sensor aggregation. The exact fit depends on memory, I/O, analog and communication requirements.

Is PIC16F15255 suitable for a new design?

Potentially. Current family member in official documentation; verify live product status and exact order code. Check the current product page, datasheet, errata and availability before final design-in.

Can another PIC16F152 device replace PIC16F15255?

A related family member may provide a memory or I/O migration path, but pin compatibility, peripheral mapping, electrical characteristics and firmware must be reviewed.

What information is needed for an RFQ?

Provide the full orderable part number, quantity, target date code, packaging, delivery destination and any traceability or inspection requirements.

Request a Quote